Products

Software Service Programs

PDK Monitor Tool
A program used during the configuration of the IDC2000 devices by means of the PDK-L3 design tool to monitor the CPU status for protection activation and command attempts.

PC Light Controller
The PC Light Controller¹ is a software service tool providing remote control of both, a network where the lighting channels of different ballasts are shared between different lighting zones (logical units) and the lighting channels of a single ballast. It also allows the direct control of the lighting channels of one ballast (physical device) irrespective of any logical sharing of a zone. This tool emulates the commands sent by a full featured wall control unit.

Network Device Setting
This RS-232 based program configures the IDC2000 device in the ballast or Wall Control Unit, prior to field installation, assigning the device network address, zone, scene as well as their repeater status.

¹ There are two versions of the Light Controller software: PC Light Controller and PDK-L Light Controller. The PDK-L version serves in the development of control function parameters and works in tandem with the PDK-L software tool. The PC version controls the lighting channels through the power line to which the addressable devices of the control network are connected as well as via the ballast serial communication link